NL4FX-94 pole cable connector with chuck and white bushing
Speakon® Lockable Loudspeaker Connector / SPX SeriesA new generation of loudspeaker amplifier system: SPX Series. This second generation of Speakon® connectors features a higher current rating for the operation of high power speakers and amplifiers carrying more than 1000 Watts. Change easily and quickly from a straight connector to the right-angle version, without disconnecting the cable. Only 3 parts. TECHNICAL DATAElectrical Rated current/contact: 40 A rms continous, 50 A audiosignal, duty cycle 50%Dielectric strength: 4kV peakRated voltage: 250 V acContact resistance after lifetime: < 2 m Insulation resistance: > 1 G<IMGInrush/Outrush current capability (12v source): 300/30A/200 msCreepage distance is according to IEC 60664-1 Mechanical Retention method: Quick lock with latchLifetime (mating cycles): > 5000Cable anchoring: NEUTRIK® chuck principleCable O.D. range: 6-14 mm / 0.24 - 0.55"Cable retention force of >220N is subject to cable OD and materialWiring: screw-type terminals (stranded wire 5mm2/10 AWG) or soldering (stranded wire 6mm2)Solderability: complies with IEC 68-2-20Materials Contacts: Brass CuZn39Pb3Locking element: Zinc diecast ZnAI4Cu1Housing / insert: PBTP 20% GRBushing: Polyamide PA 6 15% GRChuck: Polyacetal POMTemperature range: -30°C to +80°CFlammability: UL94V-0 (housing), UL94HBWIRINGAmplifierStereo ("HIFI"): one NL4MP socket left channel pins 1+/1- right channel pins 2+/2-Power ("PA) Standard: three NL4MP sockets "A" socket: left channel pins 1+/1- "B" socket: right channel pins 1+/1-Bridged mono: "M" socket: left channel pins 1+/1- right channel pins 2+/2-BI-Amp: one NL4MP socket low frequency pins 1+/1- high frequency pins 2+/2-CableStereo ("HIFI"): NL4FC/NL4FX/NL4FRX on amplifier end, four conductor cable splits into two pairs with NL4FC/NL4FX/NL4FRX on each endPower ("PA) Standard: a two-conductor cable for each channel with NL4FC/NL4FX/NL4FRX on both endsBridged mono: a special two-conductor cable, on both ends wired to pin 1+/2+ of NL4FC/NL4FX/NL4FRX BI-Amp: a four-conductor cable on both ends wired to pins 1+/1-, 2+/2- of NL4FC/NL4FX/NL4FRX SpeakerStereo ("HIFI"): one NL4MP per speaker left speaker pins 1+/1- right speaker pins 2+/2-Power ("PA) Standard: NL4MP pin 1+ to speaker coil "+" NL4MP pins 1- and 2+ to speaker coil "-"Bridged mono: NL4MP pin 1+ to speaker coil "+" NL4MP pins 1- and 2+ to speaker coil "-"BI-Amp: one NL4MP socket low frequency pins 1+/1- high frequency pins 2+/2-
Er zijn geen beoordelingen over dit artikel.
© Copyright 2005 - 2013 van Sikkelerus, voor verhuur materiaal www.sikkelerus.nl
Back to Top