• 210_1107119658 210_1107119658

Neutrik NL8MD V BAG - 8 pole chassis connector

€ 12,90

NL8MD-V-BAG
8 pole chassis connector with black chrome metal flange. Vertical PCB mounting version of NL8MP.

TECHNICAL DATA

Electrical
Rated current/contact: 30 A rms continous,
40 A rms 1 min.
Dielectric strength: 4kV peak
Rated voltage: 250 V ac
Contact resistance: = 3 m  (= 10 m  for NL4MD-H) after 5000 insertion-withdrawal operations
Insulation resistance - initial: > 2 G
- after damp heat test: > 1 G
Inrush/outrush current capability (12 V source): 300/30 A/200 ms
Creepage distance: according to IEC 664-1

Mechanical
- Chassis: flat tabs for FASTON 0.187" x 0.02" (4.8 mm x 0.5 mm) or PCB-version with pins 1.6 mm x 0.5 mm (FASTON is a trademark of AMP Inc.)
Solderability complies with IEC 68-2-20

Materials
Contacts:
Female: CuZn39Pb3
Male: CuSn8, 4 µm Ag plated
Housing Insulator: PA 6 30% GR
Housing Flange: Zinc Diecast ZnAl4Cu1 gal black chromium
Temperature range: -30°C to +80°C
Flammability: UL94HB

WIRING

Amplifier
Stereo ("HIFI"): one NL4MP socket left channel pins 1+/1- right channel pins 2+/2-
Power ("PA) Standard: three NL4MP sockets "A" socket: left channel pins 1+/1- "B" socket: right channel pins 1+/1-
Bridged mono: "M" socket: left channel pins 1+/1- right channel pins 2+/2-
BI-Amp: one NL4MP socket low frequency pins 1+/1- high frequency pins 2+/2-

Cable
Stereo ("HIFI"): NL4FC on amplifier end, four conductor cable splits into two pairs with NL4FC on each end
Power ("PA) Standard: a two-conductor cable for each channel with NL4FC on both ends
Bridged mono: a special two-conductor cable, on both ends wired to pin 1+/2+ of NL4FC
BI-Amp: a four-conductor cable on both ends wired to pins 1+/1-, 2+/2- of NL4FC

Speaker
Stereo ("HIFI"): one NL4MP per speaker left speaker pins 1+/1- right speaker pins 2+/2-
Power ("PA) Standard: NL4MP pin 1+ to speaker coil "+" NL4MP pins 1- and 2+ to speaker coil "-"
Bridged mono: NL4MP pin 1+ to speaker coil "+" NL4MP pins 1- and 2+ to speaker coil "-"
BI-Amp: one NL4MP socket low frequency pins 1+/1- high frequency pins 2+/2-

 

 

Speakon® Lockable Loudspeaker Connector / Chassis Connectors
Extremely reliable and robust. 2,4 and 8 pole versions with `Quick Lock` system.

The chassis types are fast and easy to wire with flat quick-connect terminations (e.g. Faston®). Excellent price / performance ratio.

Speakon connectors are airtight for audio applications (leakage 30 cm3/s at 10 kPa differential pressure) unless otherwise stated.

Dit product is beschikbaar op bestelling.

Deze variatie is niet beschikbaar.
Fabrikant Neutrik